- Molded specifically to fit marine hose dimensions
- Allows better drainage than tee
- Compact install
A fitting with three openings, a wye is used to create branch lines. It is a type of tee fitting which has the side inlet pipe entering at a 45° angle, or an angle other than 90 degrees. A standard wye is a "Y" shaped fitting which allows one pipe to be joined to another at a 45 degree angle. Wyes are similar to tees except that the branch line is angled to reduce friction and turbulence that could hamper the flow. In boat applications, a Y fitting can be advantageous because it can allow better drainage and may be easier to install due to space limitations.
Our Y fittings all have the same barb dimension for each leg.
|OEM/Bulk||Product Name||Distributor Packaged|
|Y-750-DP||Barbed Wye / Y-Fitting, 3 Way, 3/4" Hose||Y-750-DP|
|Y-118||Barbed Wye / Y-Fitting, 3 Way, 1-1/8" Hose||Y-118-DP|
|Y-112||Barbed Y-Fitting, 3 Way, 1-1/2" Hose Black||Y-112-DP|
OEM - Bulk: 50/Box
Distributor Packaged: 12/Box
- Hose Compatibility: ID 5/8", 3/4", 1-1/8"
- Color: Black
Installed 2 Bilge pumps (Attwood 1100) in my tunnel hull and wanted to tie both into one 1-1/8” hose connected to a single thru-hull.
Worked and fit as described. You will need hose clamps.
Purchased several different items and their service is outstanding. I made a mistake with measuring and no questions asked handled the exchange immediately. A pleasure to deal with.
These were designed for 1-1/2 in hose however they donâ€™t fit they are about 1/8 to small for the hose.
Easy. Product ordered was delivered. No hassle.
Have An Issue?
Contact our Support team for more assistance.
Stay In The Know
Sign up to join our mailing list.