- Molded specifically to fit marine hose dimensions
- Allows better drainage than tee
- Compact install
A fitting with three openings, a wye is used to create branch lines. It is a type of tee fitting which has the side inlet pipe entering at a 45° angle, or an angle other than 90 degrees. A standard wye is a "Y" shaped fitting which allows one pipe to be joined to another at a 45 degree angle. Wyes are similar to tees except that the branch line is angled to reduce friction and turbulence that could hamper the flow. In boat applications, a Y fitting can be advantageous because it can allow better drainage and may be easier to install due to space limitations.
Our Y fittings all have the same barb dimension for each leg.
|OEM/Bulk||Product Name||Distributor Packaged|
|Y-750-DP||Barbed Wye / Y-Fitting, 3 Way, 3/4" Hose||Y-750-DP|
|Y-118||Barbed Wye / Y-Fitting, 3 Way, 1-1/8" Hose||Y-118-DP|
|Y-112||Barbed Y-Fitting, 3 Way, 1-1/2" Hose Black||Y-112-DP|
OEM - Bulk: 50/Box
Distributor Packaged: 12/Box
- Hose Compatibility: ID 5/8", 3/4", 1-1/8"
- Color: Black
Installed 2 Bilge pumps (Attwood 1100) in my tunnel hull and wanted to tie both into one 1-1/8” hose connected to a single thru-hull.
Worked and fit as described. You will need hose clamps.
Purchased several different items and their service is outstanding. I made a mistake with measuring and no questions asked handled the exchange immediately. A pleasure to deal with.
These were designed for 1-1/2 in hose however they donâ€™t fit they are about 1/8 to small for the hose.
Easy. Product ordered was delivered. No hassle.