Installing LED lights on your shallow water anchor not only enhances your boat's look but also provides valuable visibility for night fishing. Here’s a step-by-step guide to make your installation process easy and efficient.
How to Install Shallow Water Anchor LED Lights: A Step-by-Step Guide
Step 1: Mount Waterproof Switch
1. Prepare the Mounting Area: Clean the mounting area where the switch will go using isopropyl alcohol. This removes any dirt or grease that could prevent the adhesive from sticking well.
2. Apply Adhesive Promoter: Once dry, apply 3M adhesive promoter to the area for a secure hold.
3. Mount the Switch: Place the switch onto the prepared surface, pressing firmly to ensure it sticks.
4. Connect to Power: Complete this step by wiring the switch to your boat’s power source.
Step 2: Mount Light Strips To Anchors
1. Clean the Mounting Surface: Wipe down the surface of the anchor where the LED light strips will attach using isopropyl alcohol to ensure strong adhesion.
2. Apply Adhesive Promoter: Apply 3M adhesive promoter along the cleaned area where the light strip will go.
3. Attach the Light Strip: Start at the top of the anchor and carefully mount the light strip. Peel back the red backing tape in small increments as you go, pressing the strip firmly into place to avoid air bubbles and ensure a secure bond.
Step 3: Connect Lights to Switch
1. Run the Wiring: Run the wire from the light strips down the anchor and into the boat. Use the provided extension wire as needed to reach the switch.
2. Use Waterproof Connectors: Use waterproof connectors to attach both lights together, ensuring a secure, weather-resistant connection.
3. Connect to Switch and Power: Attach the lights to the appropriate portion of the switch and power system.
4. Test and Enjoy: Flip the switch to test your new setup. Enjoy the added visibility and aesthetic boost!
Add some LEDs today!
Following these steps will help you install your shallow water anchor LED lights securely and effectively. Enjoy your upgraded fishing experience and improved nighttime visibility!
